We have active researchers from mechanical, electrical, material, chemical, and optical engineering to handle multidisciplinary flexible electronics chanllenges.
我們成員的背景包含了機械、電子、材料、化工及光學等領域，來面對軟性印刷電子的跨領域挑戰
*co-advisory

成員 Member

Cheng-Yao Lo 羅丞曜, chengyao(at)mx.nthu.edu.tw

Received the Ph.D. degree in electrical engineering from The University of Tokyo, Tokyo, Japan, in 2009. During 2001–2005, he was a Senior R&D Process Integration Engineer in Taiwan Semiconductor Manufacturing Company, where he was responsible for the Salicide process integration. During 2006–2009, he was a Visiting Researcher at VTT Technical Research Centre of Finland, where he was responsible for the large-area-printed microelectromechanical systems display project.
Since 2010, he joined National Tsing Hua University as a faculty in both Department of Power Mechanical Engineering and Institute of NanoEngineering and MicroSystems.
His current research interest is flexible printed electronic devices and processes.

Yu-Wen Chen 陳裕文, n0022057(at)hotmail.com

is working on tactile sensing.

2020 ISME 第二屆福星熱能創意競賽(智能感測器類)第三名(新型熱阻式應變元件及其於卷對卷製造之應用)。

Padmanabh P. Pancham 帕滿納, pancham1195(at)gmail.com

is working on thermoresistive surface profiling.

Shivendra Singh 曦范德, shivendrasingh(at)gapp.nthu.edu.tw

is working on numerical and analytical FOPLP warpage suppression.

Chen-Hao Hong 洪晨皓, ricky200817(at)gmail.com

is working on system integration and miniaturization.

Chieh-Cheng Wang 王頡城，jay95199(at)gmail.com

is working on tactile sensing system.

Yu-Hsin Tseng 曾郁心，shirley000726(at)gmail.com

is working on energy harvester based on 3rd-generation semiconductors.

秦瑋澤，aa4121827(at)gmail.com

is working on smart sunglasses.

袁明澤，michaelyuan900610(at)gmail.com

is working on in-mold-fabricated sensors for smart gripper.

Zih-Yu Chen 陳子媮，lovedychen(at)gmail.com

is working on fluidic modeling of baseball pitching for sports science
applications.

畢業生 Alumni

Teng-Chung Liu 劉騰中，andy19981022(at)gmail.com

is working on thermoresistive surface profiling.

Tzu-Yi Hsu 徐梓溢，fnk59456(at)gmail.com

is working on force sensors.

Kuanyi Wu 吳冠儀, wukkk1(at)gapp.nthu.edu.tw

is working on smart manufacturing

Jie-Ying Wu 吳杰穎，austinwu000(at)gapp.nthu.edu.tw

is working on tactile sensing.

Rongqing Qiu 邱榮慶，winghingyau(at)gapp.nthu.edu.tw

is working on automatic optical inspection (AOI).

Yuan-Ren Yang 楊淵任，as28583477(at)gmail.com

is working on thermoresistive surface profiling.

Mu-Lin Tsai 蔡沐霖，asd81673413(at)gmail.com

is working on smart manufacturing.

Dr. Snehasis Sahoo 倪安書，sahoo.snehasis593(at)gmail.com

Dr. Sahoo received PhD in Materials Science and Engineering from
National Tsing Hua University in 2019.
He is a professional in design and fabrication of OLEDs.
He is currently characterizing 3D profiles of materials for smart
manufacturing applications.

Ye-Jin Zheng 鄭業瑾*, 2021, master

is working on wearable force sensors for sports science.

Draft (20210830) Defense (20210809) Thesis (20210830)

Meng-Jhu Wu 吳孟竹, 2020, master

“以圖樣變異預測螺旋天線電磁響應” (Evaluation on Electromagnetic Response of Spiral Antenna by Its Pattern Deterioration)
Draft (20210109) Defense (20210105) Thesis (20210126)

Ting-Jeng Liu 劉廷政, 2020, master

“優化之圖樣變異檢測方法及其在電性上之預測應用” (Advanced pattern variation detection method and its application in electric characteristic prediction)
Draft (20200727) Defense (20200708) Thesis (20200825)

“Machine learning-based off-line electrical characteristic prediction through in-line pattern integrity inspection”, Journal of Micromechanics and Microengineering, Vol. 31, 015005 (2021)
doi:10.1088/1361-6439/abc96c

“Efficient and improved qualification methodfor patterns with irregular edges in printed electronics”, Journal of Micromechanics and Microengineering, Vol. 29, 124005 (2019)
doi:10.1088/1361-6439/ab4ed7

台灣機電工程國際學會109年度全國學術研討會(口頭發表)分組第一名(自動光學影像辨識對產線半成品之特性預測技術開發)。

2019漢民科技論文獎(科技論文競賽類)金獎(高效率無誤差之微電子產線自動光學檢測手法)。

Kuo-Feng Chiu 邱國峰, 2020, master

“Linear strain maximization in MEMS-elastomer hybrid configurations for isotropic electromagnetic modulations in stretchable electronics”, Displays, Vol. 64, 101963 (2020).
10.1016/j.displa.2020.101963

“以微機電系統產生彈性體等向應變之設計優化” (Isotropic strain optimization in MEMS-elastomer hybrid system)
Draft (20200113) Defense (20200106) Thesis (20200115)

2019台灣物理年會(海報發表)佳作獎(Enhancing Color Purity by Enlarging Isotropic Strain Distribution in MEMS-Based SPR)。

OPTIC 2019(口頭發表)Student Paper Award(Enlarging the degree of isotropic of strains for improved color purity in surface plasmon resonance)。

En-Cheng Yang 楊恩誠*, 2019, master

“多邊形電極於剪力量測靈敏度之探討” (Study on Sensitivity of Polygon Electrode in Shear Force Measurement)
Draft (20190831) Defense (20190724) Thesis (20190905)

Yi-Rui Zhang 張益瑞, 2019, master

“Realization of Multistage Detection Sensitivity and Dynamic Range in Capacitive Tactile Sensors”, IEEE Sensors Journal, Vol. 20, 9724-9732 (2020).
doi:10.1109/JSEN.2020.2992484

“擴大電容式觸覺感測器工作範圍之研究” (Enlarging the Operating Window of Normal Force Detection in Capacitive Tactile Sensors )
Draft (20191023) Defense (20191007) Thesis (20191022)

Kuan-Hsun Liao 廖冠勛, 2019, Ph. D.

“Thermoresistive Strain Sensor and Positioning Method for Roll-to-Roll Processes”, Sensors, Vol. 14, 8082-8095 (2014).
doi:10.3390/s140508082

“Continuous inkjet-patterned and flashlight-sintered strain sensor for in-line off-axis detection in roll-to-roll manufacturing”, Mechatronics, Vol. 59, 95-103 (2019).
doi:10.1016/j.mechatronics.2019.03.006

“應用焦耳熱效應之熱阻式應變感測元件” (A Thermoresistive Strain Sensing Device Based on Joule Heating Effect)
Draft (20190902) Defense (20190730) Thesis (20190902)

Chih-Hao An 安智豪, 2019, master

“Strain sensor with low thermal conductivity concealing resin for enhanced detection sensitivity and improved spatial resolution”, Journal of Micromechanics and Microengineering, Vol.29, 124001 (2019).
doi:10.1088/1361-6439/ab45d0

2018台灣鍍膜科技協會年會(口頭發表)優等獎(以噴墨印刷技術製作之熱阻式應變感測器)。

中華民國斐陶斐榮譽學會碩士班會員。

“熱阻式應變感測元件之效能分析” (Efficiency and Effectiveness Analyses on Thermoresistive Strain Sensors)
Draft (20190830) Defense (20190723) Thesis (20190830)

Yu-Hao Jen 任聿浩, 2019, master

107年科技部工程司自動化學門成果發表會(海報發表)特優獎(高效電容式壓力感測系統之開發與優化(II))。

中華民國高分子學會2019年會(海報發表)佳作獎(Low-Rigidity Polydimethylsiloxane and Its Application in Microelectronics)。

中國機械工程學會108年度年會(口頭發表)佳作獎(雙空心疊加型電容式觸覺感測器及其近六百倍之正向力檢測靈敏度改善)。

“疊加型電容式觸覺感測器之靈敏度改善” (Sensitivity Enhancement in Stacked Capacitive Tactile Sensors)
Draft (20190830) Defense (20190729) Thesis (20190830)

“Development and characterization of vertically stacked tactile sensor with hollow structure”, IEEE Sensors Journal, Vol. 21, 5809-5818 (2021).
doi:10.1109/JSEN.2020.3037261

Shao-Min Hsu 徐紹珉, 2019, master

“Advanced qualification mehtod for patterns with irregular edges in printed electronics”, Flexible and Printed Electronics, Vol. 4, 015001 (2019).
doi:10.1088/2058-8585/aaf311

台灣機電工程國際學會108年度全國學術研討會(口頭發表)分組第一名(微電子電路圖樣之完整性量化與質化技術)。

“印刷電子圖案不規則邊緣之進階量化方法” (Advanced Qualification Methode for Patterns with Irregular Edges in Printed Electronics)
Draft (20190102) Defense (20190110) Thesis (20190128b)

Yu-Tang Hu 胡鈺堂, 2018, master

“Surface plasmon resonance manipulation through application of mechanically generated planar and linear strain”, Applied Physics Express, Vol. 12, 096504 (2019).
doi.org/10.7567/1882-0786/ab3948

IEEE NEMS 2019(口頭發表)最佳學生論文獎及最佳大會論文獎決選入圍(Isotropic Nanophotonic Modulation with Hybrid Configuration for Surface Plasmon Resonance Application)。

“可調變反射式電漿子濾光結構之應變機制優化” (Straining Mechnism Opitmization for Tunable Filter Based on Reflective Surface Plasmon Resonance)
Draft (20180726) Defense (20180726) Thesis (20180816)

Yu-Hong Gao 高宇鴻, 2018, master

“Five-fold sensitivity enhancement in a capacitive tactile sensor by reducing material and structural rigidity”, Sensors and Actuators A: Physical, Vol. 293, 167-177 (2019).
doi:10.1016/j.sna.2019.04.043

MNC 2018 最佳海報獎(Advanced Capacitive Tactile Sensor for Up-to-Sixfold Sensitivity Enhancement by Reduced Structural Rigidity)。

106年科技部工程司自動化學門成果發表會(海報發表)最佳海報獎(高效電容式壓力感測系統之開發與優化)。

“結構剛性於電容式觸覺感測器靈敏度之研究” (Sensitivity Study on Capacitive Tactile Sensors with Various Structural Rigidities)
Draft (20180726) Draft (20180817) Defense (20180726) Thesis (20180823)

Yi-Chu Chen 陳奕竹, 2018, master

“An integrated method based on energy concentration for evaluating normally distributed spectra in the visible region”, Displays, Vol. 57, 7-17 (2019).
doi.org/10.1016/j.displa.2019.02.002

“可見光頻譜優劣判斷方法之開發” (Development of Evaluation Method for Visible Spectra)
Draft (20180612) Defense (20180510) Thesis (20180612)

Shih-Chun Lo 羅仕鈞, 2017, master

“Numerical analysis of a microelectromechanical system-based color filtering device with surface plasmon resonance modulation “, Displays, Vol. 54, 20-27 (2018).
doi:10.1016/j.displa.2018.08.002

“以微機電系統實現表面電漿子共振顯示之理論設計” (Theoretical Design of Surface Plasmon Resonance Display Realized by MEMS)
Defense (20170713) Thesis (20170828)

Li-Wen Wang 王俐雯, 2017, master

“Morphology and Conductivity Improvement of Metal Mesh Through Roll-to-Roll-Compatible Near-Infrared Sintering”, Micro & Nano Letters, Vol. 12, 886-890 (2017).
doi:10.1049/mnl.2017.0418

IEEE NEMS 2017(口頭發表)最佳大會論文獎(Morphology and Conductivity Enhancement of Metal Mesh in OLEDs by Near Infrared and Intense Pulse Light)。

“大粒徑高黏度奈米金屬粒子塗料之高效燒結技術” (High Efficiency Sintering Techniques for Large and Viscous Metal Nanoparticle Ink)
Defense (20170713) Thesis (20170828)

Shi-Yu Ke 柯詩彧*, 2017, master

“一種改善空間解析度/靈敏度之電容式觸覺感測器研究” (A New Capacitive Tactile Sensor for Enhancing Spatial Resolution and Sensitivity)
Defense (20170721) Thesis (20170905)

Sheng-Feng Lin 林聖峰*, 2016, Ph. D.

“Near-Infrared Imaging System for Nondestructive Inspection of Micro-Crack in Wafer Through Dicing Tape”, Applied Optics, Vol. 54, E123-E128 (2015).
doi:10.1364/AO.54.00E123

Bo-Cin Huang 黃柏欽, 2016, master

“Inkjet-Patterned Porous Split-Ring Resonator and Its Performance Study on Metamaterial Application”, Journal of Micromechanics and Microengineering, Vol. 28, 095012 (2018).
doi:10.1088/1361-6439/aac669

“Mechanical Stress-Controlled Tunable Active Frequency-Selective Surface “, Applied Physics Letters, Vol. 110, 044101 (2017).
doi:10.1063/1.4974853

“Methodology for Evaluating Pattern Transfer Completeness in Inkjet Printing with Irregular Edges”, Journal of Micromechanics and Microengineering, Vol. 26, 065009 (2016).
doi:10.1088/0960-1317/26/6/065009

“噴印二維圖樣之完整性量化手法” (Quantification Methodology for 2D Inkjet-Printed Patterns)
Defense (20160706) Thesis (20160728)

Mochtar Chandra 劉建豪, 2016, master

“Vertically Stacked Capacitive Tactile Sensor with More Than Quadrupled Spatial Resolution Enhancement from Planar Arrangement”, Sensors and Actuators A: Physical, Vol. 263, 386-390 (2017).
doi:10.1016/j.sna.2017.07.004
“Doubling the Spatial Resolution in Capacitive Tactile Sensors”, Journal of Micro/Nanolithography, MEMS and MOEMS, Vol. 16, 035001 (2017).
doi:10.1117/1.JMM.16.3.035001

“電容式觸覺感測器之空間解析度優化” (Spatial Resolution Enhancement for Capacitive Tactile Sensor)
Defense (20160706) Thesis (20160628)

Jian-Wei Hong 洪建瑋, 2015, master

“Critical dimension and pattern size enhancement using pre-strained lithography”, Applied Physics Letters, Vol. 105, 154103 (2014).
doi:10.1063/1.4898572

“二維等向預應變微影技術” (Two-dimensional isotropic pre-strain lithography)

Defense (20150727) Thesis (20150812)

Chin-Yen Lin 林勁言, 2015, master

“Structure Compensation and Illumination Uniformity Improvement Through Inkjet Printing in Organic Light-Emitting Diode Subpixels “, Journal of Vacuuum Science & Technology B, Vol. 35, 020601 (2017).
doi:10.1116/1.49749323

Hui-Ju Chan 詹慧如, 2015, master

“Porosity Reduction in Inkjet-Printed Copper Film by Progressive Sintering on Nanoparticles”, Thin Solid Films, Vol. 627, 33-38 (2017).
doi:10.1016/j.tsf.2017.02.062

Tsun-Yi Chen 陳尊義*, 2014, Ph. D.

“Friction-Assisted Pulling Force Detection Mechanism for Tactile Sensors”, Journal of Microelectromechanical Systems, Vol. 23, pp. 471-481 (2014).
doi:10.1109/JMEMS.2013.2280149

Shi-Te Chuang 莊士德*, 2014, master

“Capacitive Tactile Sensor with Asymmetric Electrodes for Angle-Detection-Error Alleviation”, Sensors and Actuators A: Physical, Vol. 250, 159-169 (2016).
doi:doi:10.1016/j.sna.2016.09.022

Michal Stach 賀米昊, 2013, master

“Enlarging a Post-Lithography Pattern Modification Process Window with a Poisson’s Ratio-Matching Inter-Layer”, Microelectronic Engineering, Vol. 127, pp. 97-101 (2014).
doi:10.1016/j.mee.2014.05.024
“Post-Lithography Pattern Modification and Its Applicationto a Tunable Wire Grid Polarizer “, Nanotechnology, Vol. 24, 115306 (2013).
doi:10.1088/0957-4484/24/11/115306

Chung-Yuan Yang 楊仲元, 2013, master

Yi-Chen Chung 鍾易辰*, 2013, master

“Capacitive Tactile Sensor for Angle Detection and Its Accuracy Study”, IEEE Sensors Journal, Vol. 16, 6857-6865 (2016).
doi:10.1109/JSEN.2016.2583544

Yu-Han Chien 簡于涵*, 2012, master

Shen-An Kuo 郭勝安, 2012, master

“A High Sensitivity Three-Dimensional-Shape Sensing Patch Prepared by Lithography and Inkjet Printing “, Sensors, Vol.12, 4172-4186 (2012) .
doi:10.3390/s120404172
“Zero Power Consumption Visual Curvature Sensor by Flexible Interferometer”, Sensors and Actuators A: Physical, Vol. 169, 295-300 (2011) .
doi:10.1016/j.sna.2011.03.026

Yung-Chen Wang 王詠辰*, 2011, master

“Mutual Capacitive Flexible Tactile Sensor for 3-D Image Control”, Journal of Microelectromechanical Systems, Vol.22, 804-814 (2013).
doi:10.1109/JMEMS.2013.2245402